Air Compressor Servicing Milton Keynes

Milton Keynes

The huge number of businesses covers almost every economic activity imaginable, and many of them need reliable air compressors. One particularly large sector is in science and technology, attracted by the combination of Milton Keynes’ start-up-friendly atmosphere, and the presence of the Open University, which is based in the city.

One everyday use for compressed air in the technology sector is the production of nitrogen for laser cutting. This requires an incredibly high quality of nitrogen to ensure the accuracy and quality of the cut, and our engineers are always on hand to make sure that standard is met.

Optimising Your Compressed Air System

Planned maintenance is what separates a system that runs reliably for years from one that fails at the worst possible moment. An annual service covers oil changes, filter replacements, belt inspection, safety valve testing, and condensate drain checks – the items most likely to cause unplanned downtime if left past their service interval. We also carry out data logging across your compressed air system, measuring actual demand over 7 to 14 days to identify pressure mismatches, artificial demand, and load patterns that routine checks miss.

Our energy audit for air compressors builds on this data – benchmarking specific energy consumption against your actual production requirement and showing the payback period on any recommended changes. Whether you need new air dryers, a compressor upgrade, or a full system review, our Milton Keynes-area engineers respond quickly.

Compressed Air Leak Detection in Milton Keynes

Compressed air leaks are the single most common source of energy waste in an industrial system. A 3mm leak at 7 bar wastes roughly 1.6 kW continuously – over 14,000 kWh per year on a site running two shifts. Most facilities have multiple leak points, typically at pipework joints, hose connections, and point-of-use fittings.

Our compressed air leak detection service uses ultrasonic detection equipment to locate leaks across your distribution network without interrupting production. We provide a prioritised report showing each leak’s location, estimated loss rate, and repair cost. Many sites recover the cost of the survey within the first month of carrying out the fixes.

If your compressor is running longer than expected to hold set point pressure, a leak detection survey is the most cost-effective first step. Contact us to arrange a visit for your Milton Keynes site.

How often should an air compressor be serviced?

Most rotary screw compressors require a service every 2,000 to 4,000 running hours, or annually – whichever comes first. Atlas Copco GA series units have specific intervals covering oil, filters, belts, and safety valves. Running past these intervals risks bearing failure, downstream oil contamination, and voided warranty cover. If you are unsure when your machine is next due, we can check the service history and advise.

Is it worth repairing an air compressor?

In most cases, yes – provided the air end is in serviceable condition and the machine has not exceeded its economic life. We assess repair viability based on the machine’s age, the cost of the fault against its replacement value, and parts availability. For older equipment outside Atlas Copco’s supported range, we can advise whether repair, a refurbished unit, or a new compressor gives the better long-term cost position.